1 Connect your aerial with the supplied coaxial cable.

If connecting to an aerial only (A)

Connect your aerial to the socket on the rear of the TV, then go to step 3.

If connecting to a VCR with an aerial (B)

Connect your aerial to the input socket on your VCR.

2 Connect your VCR.

1Connect the output socket on your VCR to the

socket on the rear of the TV with the RF lead.

2Connect the scart socket on your VCR to the

/ 2 scart socket on the rear of the TV with a scart lead.

3 Connect the supplied mains lead to the AC IN socket on the rear of the TV.

Note

Do not connect the mains lead to your mains socket until all connections are complete.

4 Bundle the cable.

1

2

1 Run the mains lead through the bundling band and attach to the right of the rear panel with the supplied screw.

2Remove the screw to open one side of the cable cover and run the cables through, then tighten the screw again.

4:Preventing the TV from toppling over

For additional stability, the anchor attachments on the back of the TV can be used to secure the TV to a wall. (Do not remove the anchor attachments.)

1 Run suitable cables through the holes of both anchor attachments on the back of the TV.

cable

anchor attachment

(not supplied)

(with hole)

2 Anchor the cable to a stable surface such as a wallor piller.

wall anchor bracket (not supplied)

5:Securing the mains lead

mains lead plug holder (supplied)

mains lead cord clamp (supplied)

12 GB