Sony KE-W50A10E Skip, Decoder, Audio Filter

Option	Description
Audio Filter	Improves the sound for individual channels in the case of distortion
	in mono broadcasts. Sometimes a non-standard broadcast signal
	can cause sound distortion or intermittent sound muting when
	watching mono programmes.
	1	Press M/m to select “Low” or “High”, then press OK.
		If you do not experience any sound distortion, we recommend
		that you leave this option set to the factory setting “Off”.
	2	Press m to select “Confirm”, then press OK.
	3	Press m to select “OK”, then press OK.
	Note
	You cannot receive stereo or dual sound when “Low” or “High” is
	selected.
Skip	Skips unused channels when you press PROG +/- to select
	channels. (You can still select a skipped channel using the number
	buttons.)
	1	Press M/m to select “Yes”, then press OK.
	2	Press m to select “Confirm”, then press OK.
	3	Press m to select “OK”, then press OK.
	To restore a skipped channel, select “No” in step 1.
Decoder	Views and records the scrambled channel selected when using a
	decoder connected to the scart connector		/	2 either
	directly or via a VCR.

Note

Depending on the country/region selected for “Country” (page 29), this option may not be available.

1Press M/m to select “On”, then press OK.

2Press m to select “Confirm”, then press OK.

3Press m to select “OK”, then press OK.

To cancel this function afterwards, select “Off” in step 1.

Menu the Using

33 GB