AV Preset
Do the following options.
1 Press OK to select “AV Preset”.
2 Press M/m to select the desired input source, then press OK. 3 Press M/m to select the desired option below, then press OK.
| Option | Description |
|
|
| Label | Assigns a name to any equipment connected to the side or rear |
| sockets. The name will be displayed briefly on the screen when the |
| equipment is selected. |
| Press M/m to select one of the following, then press OK. |
| Equipment labels: Uses one of these preset labels. |
| Edit: Creates your own label. Follow steps 3 to 5 of “Programme |
| Labels” (page 30). |
|
|
| Skip | Skips an input source that is not connected to any equipment when |
| you press M/m to select the input source. |
| After selecting this option, press OK. |
|
|
Manual Programme Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/- to select the programme number with the channel. You cannot select a programme number that is set to skip (page 33).
1 Press OK to select “Manual Programme Preset”.
2 Press M/m to select one of the following options, then press OK.
Menu the Using
Continued
31 GB