PrecautionsPDP Screen

•Please note that the PDP screen is made with high- precision technology. However, black points or bright points of light (red, blue or green) may appear constantly on the PDP screen, and irregular coloured stripes or brightness may appear on the PDP screen. This is not a malfunction.

•With extensive use of this TV set in 4:3 mode, the 4:3 screen area might become darker within a 16:9 panel. To avoid this problem, the “Smart” picture mode should be used (see page 15).

On image retention

•If the following images are displayed for extended periods of time, image retention (afterimage) in areas of the screen may result due to the characteristics of the Plasma Display Panel.

-Black bars at the top and bottom that appear with a wide video source (Letterbox picture).

-Black bars to the left and right that appear with a 4:3 video source (conventional TV broadcasts).

-Video game sources.

-DVD on-screen menu displays.

-On screen menus, channel logos etc., of connected equipment such as Set top box, Cable modem, VCR, etc. The risk of this is higher if the TV set is in “Vivid” mode or has a high contrast setting. This image can not be removed once burnt onto the screen. To avoid the risk of image retention do not leave the TV set operating on such a picture, or programme for a long period of time, use the “Screen Saver” function (page 26) or lower the contrast setting. Repeated, extended daily use of the same image, or programme can also result in this occurrence. IMAGE RETENTION IS NOT COVERED BY THE SONY WARRANTY.

•To reduce image retention, this TV set has the “Screen Saver” function. The default setting of the “Orbit” function in “Screen Saver” is “On” (page 26).

•The “Screen Saver” function prevents and reduces images retention. For more details, see page 26.

On altitude

When used at an altitude of greater than 1900 or 6248 feet (air pressure less than 800hPa), this Plasma Display Panel may generate a low buzzing sound as a result of the difference between the interior and external air pressure of the panels. This is not considered a defect and is not covered by the Sony warranty. This buzzing sound is an inherent characteristic of any Plasma Display Panel.

Installing the TV set

•Do not install the TV set in places subject to extreme temperature, for example in direct sunlight, or near a radiator, or heating vent. If the TV set is exposed to extreme temperature, the TV set may overheat and cause deformation of the casing or cause the TV set to malfunction.

•The TV set is not disconnected from the mains when the TV set is switched off. To disconnect the TV set completely, pull the plug from the mains.

•To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed down from the ceiling.

•Do not install optional components too close to the TV set. Keep optional components at least 30 cm away from the TV set. If a VCR is installed in front of the TV set or beside the TV set, the picture may become distorted.

Handling and cleaning the screen surface/ cabinet of the TV set

The screen surface is finished with a special coating to prevent strong light reflections.

To avoid material degradation or screen coating degradation, observe the following precautions.

•Do not push on the screen, scratch it with a hard object, or throw anything at it. The screen may be damaged.

•Do not touch the display panel after operating the TV set continuously for a long period as the display panel becomes hot.

•We recommend that the screen surface be touched as little as possible.

•To remove dust from the screen surface/cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution. You can wash and repeatedly use the soft cloth.

•Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material.

•The ventilation holes can accumulate dust over time. To ensure proper ventilation, we recommend removing the dust periodically (once a month) using a vacuum cleaner.

Disposal of the TV set

Disposal of Old Electrical

&Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

7 GB