To change the screen mode manually to suit the broadcast

Press repeatedly to select Wide, Smart, 4:3, 14:9, or Zoom.

Wide

Displays wide screen (16:9) broadcasts in the correct proportions.

Smart*

Displays conventional 4:3 broadcasts with an imitation wide screen effect. The 4:3 picture is stretched to fill the screen.

4:3

Displays conventional 4:3 broadcasts (e.g., non-wide screen TV) in the correct proportions.

14:9*

Displays 14:9 broadcasts in the correct proportions. As a result, black border areas are visible on the screen.

Zoom*

Displays cinemascopic (letter box format) broadcasts in the correct proportions.

*Parts of the top and bottom of the picture may be cut off.

Tips

• Alternatively, you can set “Auto Format” to “On”. The TV will automatically select the best mode to suit the broadcast (page 25).

• You can adjust the portion of the picture when selecting Smart, 14:9, or Zoom. Press m/M to move up or down (e.g., to read subtitles).

Viewing pictures from connected equipment

Switch on the connected equipment, then perform one of the following operation.

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on the screen.

For other connected equipment

Press / repeatedly until the correct input symbol (see below) appears on the screen.

1/ 1, 2/ 2, 3/ 3: Audio/video or RGB input signal through the scart

socket / 1, 2 or 3. appears only if an RGB source has been connected.

4:

Component input signal through the Y, PB/CB, PR/CR

sockets /4, and audio input signal through the

L/G/S/I, R/D/D/D sockets / 4.

5:

Digital audio/video signal is input through the HDMI IN 5 socket. Audio input signal is analogue only if the equipment has been connected using the DVI and audio out socket.

6/6:

Video input signal through the video socket 6, and audio input signal through the audio socket L/G/S/I

(MONO), R/D/D/D sockets 6. appears only if

the equipment is connected to the S video socket 6

instead of the video socket 6, and S video input

signal is input through the S video socket 6.

Additional operations

To

Do this

 

 

 

Return to the normal Press

.

TV operation

 

 

 

 

Access the Input

Press OK, then press ,. To select

signal index table

an input source, press m/M, then

 

press OK.

 

 

 

18 GB