Sony KP-48PS1K, KP-53PS1K, KP-61PS1K Additional Information when connecting equipment, Select and View the Input Signal, Using Optional Equipment, Symbol, Input signals, Connecting a VCR

Optional Connections

Using Optional Equipment

Additional Information when connecting equipment

Connecting a VCR

We recommend you connect your VCR to the Bor Csocket using a scart lead. If you do not have a scart lead, use the “Manually Tuning the TV” section of this instruction manual to tune in the channel of the VCR test signal to TV programme number “0”. Also refer to your VCR instruction manual to get the VCR test signal.

If your video supports Smartlink please refer to the "Smartlink" section of this instruction manual.

Connecting to External Audio Equipment1 To listen to the audio of your projection TV on the Hi-Fi equipment:

Plug in your Hi-Fi equipment to the E sockets on the rear of the projection TV if you wish to amplify the audio output from the TV.

The output level from E sockets can be varied by adjusting the volume of the headphones. Refer to the “Adjusting the sound” section of this instruction manual to adjust the volume of the headphones.

2 To listen to the Dolby Prologic system sound on the projection TV speakers:

Plug in your Dolby Prologic system decoder amplifier to the D socket on the rear of the projection TV if you wish to listen to the audio output from your equipment on the projection TV speaker. If you have a Dolby amplifier, connect the centre output from your amplifier to the Dsocket to use the projection TV as a centre speaker. Refer to the “Using the Features menu” section of this instruction manual and set the option “Speaker” to “Centre in”.

Remember that the maximum input level of this input is 30 W. Be careful never to over this limit.

For mono equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select the		4 input signal using the instructions on
		4 input signal using the instructions on
this page below.

Select and View the Input Signal

In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the connector to which you have connected the device.

e. g. : Your VCR is connected to the connector with the symbol Y1/ 1. Press the button on the remote control repeatedly until you see the symbol 1 on the screen.

VIDEO TV

1 2 3

4 5 6

7 8 9

PROGR

RM 892

1 Connect your equipment to the designated projection TV socket, as it is indicated on the previous page.

2 Press the button repeatedly on your remote control until the correct input symbol appears on the screen.

Symbol

Input signals

1 • Audio/video input signal through the Scart connector A or * RGB through Scart connector A.

2 • Audio/Video input signal through the Scart connector B or * S Video through Scart connector B.

3 • Audio/Video input signal through the Scart connector C or * S Video through Scart connector C.

4 • S Video input signal through the 4-pin DIN connector F or * video input signal through phono jack G and audio input signal through phono jacks H.

* (automatic detection of the signal according to the connected equipment)

3	Switch on the connected equipment.
4	To return to the normal TV picture, press the	button on the remote control.

Optional Connections 29