Sony KP- 57WV700, KP- 65WV700, KP- 57WV600 Setting Up the Channel List, Using Auto Setup

Setting Up the Channel List

After you finish connecting your TV, you need to run Auto Setup to

set up your channels. The Auto Setup screen appears when you turn on your TV for the first time after hooking it up. If you do not want to

set up the channels at this time, you can do it later by selecting the

Auto Program option in the Channel Menu (see page 78).

The Auto Setup feature does not apply for installations that use a cable box

for all channel selection.

Using Auto Setup	1	Press	POWERto turn	on	the	TV.
	2	Press	TVFUNCTIONon	the	remote		control.
	3	To continue running		Auto		Setup,	press	OH+. To exit Auto Setup,
		press	OH-.

Auto Setup automatically creates a list of receivable channels. When

finished, the lowest numbered channel is displayed.

To reset the TV to factory settings

1Press POWERto turn on the TV.

2Hold down RESETon the remote control.

3Press TVPOWERon the TV. (The TV will turn itself off, then back

on.)

4 Release RESET.

43