Audio
Good picture, L3
no sound
cannot gain enough volume .J
when using a cable box
Sound Seems weak or
insufficient
Press MUTINGso that Muting disappears from the screen (see page 48).
Make sure the Speaker option is set to On in the Audio Menu (see page 75).
Increase the volume of the cable box using the cable box's remote control.
Then press W FUNCTIONand adjust the TV's volume.
The TV's audio might be set to Auto SAP or Mono, when it might be better set
to Stereo, In the Audio Menu (see page 74), set the MTS setting to Stereo. If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on _1 If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
external audio speakers order to output the sound to your audio system) use your audio receiver to
adjust the sound (see page 74). Or, to use the TV remote control, set the
Audio Out option to Variable.
To turn on the TV speakers, set the Speaker option to On (see page 74).
Channels[i/Pl'-/i'/ll _F€'_nt_;*_'r'" III
Cannot receive upper _ Change the Cable option to Off (see page 78).
channels (UHF) when _ Use Auto Program in the Channel Menu to add receivable channels that are
using an antenna not presently in the TV's memory (see page 78).
is fixed to one channel _ use Auto program in the Channel Menu to add receivable Channels that are
not presently in the TV's memory (see page 78).
Check your Channel Fix settings (see page 78).
Cannot receive any _ use Aut6 Program in the Channel Menu tO add receivable channels that are
channels when using not presently in the TV's memory (see page 78).
cable TV ..I Make sure the Cable option is set to On in the Channel Menu (see page 78).
Cannot receive or select _ Use Auto Program in the Channel Menu tO add receivable TV channels that
channels are not presently in TV memory (see page 78).
93