Adjusting the Convergence Automatically (Flash Focus)
The projection tube image appears on the screen in three colors (red,
green and blue). If they do not converge, the color is poor and the
picture blurs. Before you use your TV, be sure to adjust the
convergence. The Flash Focus feature allows you to adjust the
convergence automatically.
[] Youcan also accessFlash
Focusinthe Setupmenu. For
details,see page 85.
It is recommended that you perform Flash Focusabout 30 minutes after the
TV is first turned on.
1
2
Tune to a TV or cable TV program.
Press the FLASHFOCUSbutton on the front panel of the TV (see
pages 14-15).
The cross pattern appears and Flash Focus begins to work.
+The adjustment is completed when the TV picture returns.
To Obtain Optimum Convergence
Whenever you find that the picture blurs, press FLASHFOCUS.
Youcannot perform any other functions until Flash Focus has completed its
cycle. If you perform any other operation while Flash Focus is in progress,
the Flash Focusoperation is canceled.
To Perform Additional Fine Manual Adjustments
J Use the Convergence feature, described on page 45.