Notes on Using This Connection
Set up the TV remote control
to operate the VCR
Activate the TV remote
control to operate the VCR
Control VCR functions with
the TV remote control
Watch the VCR Press W/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Watch cable channels Press W/viDE0 repeatedly to select the cable input (VHF/UHF in the
illustration).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on pages 51-52.
Open the outside cover, as shown on page 50. Then set the A/V slide switch
to the position you programmed for the VCR.
See "Operating a VCR" on page 53.
Label Video inputs to easily See the instructions for setting up Video Labels on pages 83-84.
identify equipment connected
to the TV
27