Sony KP 53V90 Adjusting the Convergence Automatically Flash Focus, To perform Auto SET UP again

3Press VOLUME – to continue.

–VOLUME +

C o n t i n u e t o

A u t o P r o g r a m ?

Y e s : [ C H + ]

N o : [ C H – ]

4Press CHANNEL + to preset channels automatically.

–CHANNEL +

A u t o P r o g r a m

“Auto Program” appears and the projection TV starts scanning and presetting channels automatically. While scanning, the received channel will be displayed on the sub screen. When all the receivable channels are stored, the lowest numbered channel is displayed.

To perform AUTO SET UP again

FLASH FOCUS TV/VIDEO

SET UP MENU

Press SET UP inside the drop-down panel on the projection TV and perform steps 2-4 above.

Press SET UP again to exit.

Adjusting the Convergence Automatically (FLASH FOCUS)

The projection tube image appears on the screen in three layers (red, green and blue). If they do not converge, the color is poor and the picture blurs.

Before you use your projection TV, be sure to adjust the convergence.

The FLASH FOCUS feature allows you to adjust the convergence automatically.

Tips z

•It is recommended to perform FLASH FOCUS about 30 minutes after the projection TV is first turned on.

FLASH FOCUS

Press FLASH FOCUS.

The cross pattern appears and FLASH FOCUS begins to work. The adjustment is completed when the cross pattern becomes white.

Note:

•FLASH FOCUS is canceled if you perform any other function while FLASH FOCUS is working.

• You can also perform FLASH FOCUS using the Set

Up menu on page 35. 19