Using Your New Projection TV
Watching the TV
Many TV features can be accessed directly through the remote control. The following chart will explain the function of some buttons found on your remote control.
Using the White Labeled Buttons for Projection TV Operations
TV (FUNCTION) | Activates the remote control for use with the projection TV. |
|
|
|
|
TV POWER | Turns the projection TV on and off. If a video input indication (e.g., VIDEO 1, |
|
| VIDEO 2) appears on the screen, press TV/VIDEO until a channel number |
|
| appears. |
|
|
|
|
0 - 9 | Use for direct channel selection. Press |
|
and ENTER | to select channel 10, press 1 and 0). The channel will change after 2 |
|
seconds, or you can press ENTER for immediate selection. |
| |
|
| |
|
|
|
CH +/– | Press to scan through the channels (+ up or – down). |
|
| Speed Surf |
|
| 1 Press and hold CH + or – to change the channel number rapidly. |
|
| 2 Release to display the desired channel. |
|
|
|
|
VOL +/– | Press to adjust the volume (+ up or – down). |
|
|
|
|
MUTING | Press to mute the sound. “Muting” will appear on the screen and will dim |
|
| three seconds later. To restore sound, press again or press VOL +. |
|
|
|
|
20
PICTURE MODE
Press PICTURE MODE repeatedly to directly choose one of five different video modes that best suits the program you are watching.
Vivid: Select for enhanced picture contrast and
sharpness.
Standard: Select to display a standard picture for normal viewing environments.
Movie: Select to display a finely detailed picture for low light environments.
Personal 1, Personal 2: Select to customize the “Picture Adjustment” of the Video menu according to your personal preference.
When you select “Vivid” and “Standard,” all video control settings are fixed.
When you select “Movie,” “Personal 1” and “Personal 2,” you can also perform the “Picture Adjustment” (such as “Brightness,” “Color,” etc.) to suit your taste. For details, see “Mode” on page 26.
