Sony KP-53S76, KP 61V90, KP-48V90, KP 53V90, KP 43T90 Connecting a satellite receiver

Connecting a satellite receiver		Disconnect all power sources before making any connections.
(SAT) and a VCR
1 Connect the cable from the satellite		(Rear of projection TV)
antenna to the satellite receiver.				3		Coaxial cable
2 Attach the coaxial cable from the			AUX
								SAT
incoming cable connection or antenna to
			TO		SATELLITE IN
			CONVERTER
VHF/UHF IN on the VCR.								VHF/UHF
		IN			AUDIO R AUDIO L VIDEO		S VIDEO	OUT
3 Using a coaxial cable, connect VHF/UHF					LINE
		VIDEO 1 VIDEO 3 VIDEO 4						IN
			VHF/UHF		OUT
		OUT
OUT on the VCR to VHF/UHF on the	S VIDEO	AUDIO		1
		(VAR/FIX)
	VIDEO	Y
projection TV.			L	Satellite
4 Using AUDIO and S VIDEO* cables,	L	PB
	(MONO)		(MONO)
	AUDIO		AUDIO	antenna
		PR	R
connect AUDIO and S VIDEO OUT on the		COMPONENT		cable		4		YC-15V/
				VMC-810S/
satellite receiver to AUDIO and S VIDEO		VIDEO						30V (not
	S VIDEO			820S (not				supplied)
IN on the VCR.		AUDIO-L
				supplied)
5 Using AUDIO and S VIDEO* cables,		AUDIO-R
connect AUDIO and S VIDEO OUT on the					AUDIO R AUDIO L VIDEO		S VIDEO
					LINE
VCR to AUDIO and S VIDEO IN on the					IN			VHF/UHF
								OUT
				VCR	LINE			IN
projection TV (White-AUDIO Left, Red-	5				OUT
								2
AUDIO Right).		VMC-810S/820S (not supplied)
* If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO								Cable/
cable.								Antenna
Note:		YC-15V/30V (not supplied)

•To view input from the satellite receiver or VCR, select the video input which your satellite receiver or VCR is connected to by pressing TV/VIDEO on the remote control.

13