Sony KP 53V90 If one of the pictures received through, PIP is snowy, the entire screen may

Using Your New Projection TV (continued)

Using the Yellow Labeled Buttons for PIP Operations

REFER TO THE ILLUSTRATION OF THE

CH

or 0 - 9 or

and ENTER

(white labeled button)

JUMP

Press to select the TV channel on which the symbol “b” is displayed. (for details, see “Watching the TV” on page 20)

Speed Surf

1Press and hold CH + or – to change the channel number rapidly.

2Release to display the desired channel.

REMOTE CONTROL ON THE

INSIDE FRONT COVER OF

THIS MANUAL AS YOU

REVIEW THIS CHART

Note:

• If one of the pictures received through

ANT	Press to change between the VHF/UHF input and the AUX input for the picture on
	which the symbol “b” (or “B”) is displayed.
(white labeled
button)
AUDIO	Press to alternate sound between the main picture and the window picture. The
	symbol “ ” will appear for a few seconds to indicate which picture’s sound is being
	received.
	This is useful when you need to copy down information of the main picture.
FREEZE	Press to freeze the desired scene in the main picture. The frozen picture is displayed
	in the window picture while viewing the normal picture in the main picture. The
	window picture size is automatically changed to 1/9 if it was 1/16.
	Press again to resume normal PIP viewing.
SWAP	Press to switch the audio and video of the main picture and the window picture.
	Each time you press SWAP, the picture and sound of the two will be exchanged.

PIP is snowy, the entire screen may

become unstable. In this case, erase the

snowy channel. (see “Channel Skip/

Add” on page 31)

24