Sony 2-691-651-13(2), KS-50R200A, KS-60R200A, KS-70R200A Sound menu, Treble, Bass, Balance, Intelligent Volume, Volume Offset, Surround, BBE, 24 GB

Sound menu

You can select the options listed below on the Sound menu. To select options in “Settings”, refer to “Picture menu” (page 21).

Target Inputs

For the input currently being viewed, select whether to use the common setting or to set each item separately.

“Common”: Applies common settings whose adjustments are shared with other inputs in which “Target Inputs” is set to “Common”.

Current input name (e.g. Video 1): Allows you to set each option separately for the current input.

Tip

Set each input to “Common” if you require the same settings to apply to each input.

Sound Mode

Selects the sound mode.

“Dynamic”: Enhances treble and bass.

“Standard”: For standard sound. Recommended for home entertainment.

“Custom”: Flat response. Also allows you to store your preferred settings.

Reset	Resets all the “Sound” settings except “Target Inputs”, “Sound Mode” and “Dual
	Sound” to the factory settings.

Treble	Adjusts higher-pitched sounds.

Bass	Adjusts lower-pitched sounds.

Balance	Emphasizes left or right speaker balance.

Intelligent Volume	Keeps a constant volume level even when volume level gaps occur (e.g. adverts tend
	to be louder than programs).

Volume Offset	Adjusts the volume level of the current input relative to other inputs, when “Target
	Inputs” is set to the current input name (e.g. Video 1).

Surround	Selects the surround mode.
	“Dolby Virtual”: Uses the TV speakers to simulate the surround effect produced by
	a multi channel system.
	“Simulated Stereo”: Adds a surround-like effect to mono programs.
	“Off”: For normal stereo or mono reception.

BBE

Gives sound more impact by compensating for phase effects in speakers using the “BBE High Definition Sound System”, when “Sound Mode” is set to “Custom”. To reproduce sounds with impact, select “High” (more impact) or “Low” (less impact). Otherwise select “Off”.