The TV starts searching for all available channels. This may take some time, please be patient and do not press any buttons on the TV or remote.
If a message appears for you to confirm the antenna connection
No channels were found. Check the antenna connection and press G/g to select “Yes”, then press to start auto-tuning again.
2 When the Program Sorting menu appears on the screen, follow the steps of “Program Sorting” (page 31).
If you do not change the order in which the channels are stored on the TV, go to step 3.
3 Press MENU to display the Clock Set menu.
4 Press F/f/G/g to set the day and time (hour and minute), then press .
8 GB
.
Press G/g to select “OK”, then press
1
5: Auto tuning the TV
The TV will search for and store all available TV channels.
1,4,6
1,4,6
3,5
5 Press MENU to exit.
The TV has now tuned in all the available channels.
6 PressG/g to select the desired setting in “Display this menu next time ?” dialog, then press 
to exit.
Tip
If “Yes” is selected and the TV is switched off by pressing 1 on the TV, or is disconnected from the AC power outlet, the auto startup procedure restarts the next time the TV is switched on.