Cinema Drive | Provides smoother picture movement when playing DVD or VCR images taken on |
| film, reducing picture blur and graininess. |
| “Auto 1”: For a stable picture with minimal noise. Set to “Auto 2” if the screen is |
| partially degraded. |
| “Auto 2”: Use this setting for standard use. |
| “Off”: Turns off the “Cinema Drive” feature. |
| Notes |
| • Even if “Auto 1” or “Auto 2” is selected, “Cinema Drive” will be automatically turned off |
| and a moving image will not be played smoothly if the image contains irregular signals or |
| too much noise. |
| • “Cinema Drive” is not available when using Freeze or Twin Picture features, or when |
| watching PC, 480p, 576p, 720p, 1080i or 1080p sources. |
|
|
Speaker | Switches on/off the TV’s internal speakers. |
| “On”: The TV speakers are turned on in order to listen to the TV’s sound through the |
| TV speakers. |
| “Off”: The TV speakers are turned off in order to listen to the TV’s sound only |
| through your external audio equipment connected to the audio output jacks. |
|
|
Audio Out | “Variable”: The audio output from your audio system can be controlled by the TV’s |
| remote. |
| “Fixed”: The audio output of the TV is fixed. Use your audio receiver’s volume |
| control to adjust the volume (and other audio settings) through your audio system. |
|
|
Cooling Mode | Select “High” to use the TV at an altitude of 1,500 m or higher, or to use the TV in |
| certain circumstances where there is a considerable rise in temperature inside the |
| TV. Select “Normal” to use the TV at normal altitudes. |
|
|
Lamp Replacement | When the lamp nears the end of its life, a message appears every time you switch on |
| the TV. After you replace the lamp, select this option and follow the |
| procedure. |
| Notes |
| • Select this option after you replace the lamp. |
| • Depending on environmental and other conditions, such as frequency of use, some lamps |
| may burn out before the lamp replacement message appears on the screen. |
| • Until you set the Lamp Replacement option, a message announcing that the lamp is at the |
| end of its life will appear every time you switch on the TV. |
|
|
Display Position | Adjust the horizontal/vertical position of the picture including menu displays and |
| messages, etc. on the TV screen. |
|
|
Language | Selects the language in which the menus are displayed. |
|
|
Product Information | Displays your TV’s product information. |
|
|
All Reset | Resets all settings to the factory settings and then displays the Auto Startup screen. |
| Note |
| All settings, including language, auto tuned channels, etc. will be reset. There may be cases in |
| which resetting takes a long time. |
|
|
Functions MENU Using