Additional Information
Replacing the lamp
The Projection lamp, like all lamps, will eventually lose brightness and functionality which affects the overall performance of your TV. How long the Lamp maintains its brightness will vary depending upon your usage and environmental conditions. To maintain the quality of your viewing experience, Sony recommends that you replace the Lamp (1) when the screen becomes dark or the color looks unusual; (2) when 
on the front of the TV flashes; (3) after approximately 8,000 hours of use (for
WARNING
Electric appliances can cause fire or high temperature, resulting in injury or death. Be sure to follow the instructions below.
•Use a Sony
•Do not remove the lamp for any purpose other than replacement. Doing so may cause injury or fire.
•Do not put flammable materials and metal objects inside the lamp receptacle of the TV after removing the lamp. Doing so may cause fire or electrical shock. Do not touch the lamp receptacle once the lamp has been removed.
•When the lamp eventually burns out, you may hear a noticeable “pop” sound. This is normal and it is inherent to this type of lamp.
•In rare instances, the bulb may pop inside the lamp unit, but the lamp unit is designed to contain all of the broken glass pieces inside the lamp unit.
•This TV’s lamp contains mercury and should be disposed of properly. Consult your local authorities regarding safe disposal. The material contained in this lamp are similar to those of a fluorescent lamp, so you should dispose of it in the same way.
1 Switch off the TV. Wait several minutes, then unplug the power cord.
(The cooling fan will continue to operate for about two minutes after switching the TV off.)
2 Wait at least 30 minutes after unplugging the power cord to allow the lamp to cool down before replacing it. To avoid being burned, do not touch the lamp receptacle once the lamp has been removed.
3 Take the new lamp out of its package. Do not touch the glass portion of the new lamp.
Notes
•Do not shake the lamp. Vibration can damage the lamp or shorten its life.
•Avoid touching the front glass of a new lamp or the glass of the lamp receptacle. This may reduce picture quality or lamp life.
4 Remove the outside lamp cover.
For
For
|
| |
|
| Additional |
5 | Remove the lamp door. (For | Information |
|
Turn the screw counterclockwise, and then turn the knob to the left until the marks on the lid and the case line up. Remove the door.
Continued