Operating Instructions
Connecting Additional Equipment
TV and VCR
Rear of TV
Video (yellow)
Audio L (white)
Audio R (red)
1Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR.
2Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF IN jack on the TV.
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
Optional Connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
You can use the 
button to switch between the VHF/UHF and VIDEO inputs.
4
