Sony KV-21SE43C, KV-20S90 Setting Up the TV Automatically, To perform Auto Setup again

Using the Remote Control and Basic Functions

Setting Up the TV Automatically

After you have finished connecting your TV, you will want to run AUTO PROGRAM to set up your channels, (KV-13M42, see page 17 for information on AUTO PROGRAM).

For models KV-20M42, KV-20S90 only

1Press to turn on the TV, the Initial setup screen appears.

(U.S. models only) (Canadian models only)

2Make your language selection, the on-screen menus will change to

reflect your choice.

3Follow the on-screen instructions to continue AUTO SET UP or for a DEMO of the menus.

For U.S. models only

4Press to operate the on-screen menus without the remote control. Follow the on-screen instructions to make adjustments to your TV settings.

To perform Auto Setup again

Press the and buttons on the front panel of the TV and follow ￿￿steps 2-4.

To reset your TV to factory settings, turn the TV on. Then, while pressing the button on the remote control, press POWER on the TV. The TV will turn itself off, then back on, the original settings will be restored.

11