Tape
Playing a tapeYou can use TYPE I (normal) tape.
1 Select a tape deck.
Press TAPE A/B (or FUNCTION on the remote) repeatedly to select “TAPE A” or “TAPE B”.
2 Load a tape.
Press A Z PUSH OPEN/CLOSE or B PUSH Z OPEN/CLOSE on the unit to open Deck A or Deck B.
Load a tape into the deck with the side you want to play back or record facing upward.
Push A Z PUSH OPEN/CLOSE or B PUSH Z OPEN/CLOSE again to close the selected deck.
3 Press NX (or N on the remote).
The tape starts playing.
4 Turn MASTER VOLUME
(or press VOLUME +/– on the remote) to adjust the volume.
Other operations
To | Do this |
Stop playback | Press x. |
|
|
Pause playback | Press NX (or X on the |
| remote). Press NX (or |
| X on the remote) again. |
|
|
Fast forward or | Press m or M. To |
rewind | return to normal playback, |
| press NX (or N on the |
| remote). |
|
|
Remove a tape | Push A Z PUSH OPEN/ |
| CLOSE or B PUSH Z |
| OPEN/CLOSE on the unit |
| when playback is stopped. |
|
|
Note
During playback, rewind or fast forward operation, you cannot open the tape deck.
Tip
If you press NX (or N on the remote) when the TAPE A function is selected and there is no tape in Deck A, the system automatically switches to the TAPE B function when there is a tape in Deck B and vice versa. Then, playback will start.