For Play Timer:
Press . or > repeatedly until the audio source you want appears in the display, then press ENTER. The display will show the timer settings.
For Recording Timer:
The display will show the timer settings. Load a recordable tape into Deck B.
7 Press "/1 to turn off the system.
The system turns on 15 seconds before the preset time.
Other operations
ToDo this
Check the setting 1 Press CLOCK/TIMER SELECT.
“SELECT” appears in the display.
| 2 Press . or > |
| repeatedly to select |
| “PLAY SELECT?” or |
| “REC SELECT?”, then |
| press ENTER. |
|
|
Change the | Start from step 1. |
setting |
|
| |
Cancel the Play 1 Press CLOCK/TIMER | |
Timer or | SELECT. |
Recording Timer | “SELECT” appears in |
| the display. |
2 Press . or > repeatedly to select “TIMER OFF?”, then press ENTER.
Notes
•If you use the Play Timer or Recording Timer and the Sleep Timer at the same time, the Sleep Timer has priority.
•The Play Timer and Recording Timer will not be activated if the system is turned on or if “STANDBY” flashes in the display.
•The volume is reduced to minimum during Recording Timer.
1 Press AMP MENU repeatedly to select the item you want.
The last selected setting for the item appears in the display.
SPECTRUM
Turn on or off the spectrum analyzer display.
SYSTEM DIMMER
Adjust the brightness of the display.
BEAM DIMMER
Adjust the brightness of the
ILLUMINATION
Select the pattern of the power illuminator when the
X-ROUND ILLUM
Turn on or off the power illuminator when the
2 Turn OPERATION DIAL to select the setting you want.
3 Press ENTER.
Notes
•When you turn MASTER VOLUME (or press VOLUME +/– on the remote), the power illuminator shows the current volume level.
•During the demonstration display, you can turn on or off the power illuminator by pressing BEAM MODE.