Specifications

AUDIO POWER SPECIFICATION

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 6-ohm loads, both channels driven, from 120 Hz – 10 kHz; rates 160 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 miliwatts to rated output.

Amplifier section

The following are measured at

AC 120 V, 60 Hz

Front/Surround speaker

RMS output power (reference):

250 W + 250 W (per channel at 6 Ω , 1 kHz, 10% THD)

Inputs

VIDEO (AUDIO IN) L/R : Voltage 250 mV, impedance 47 kilohms

AUDIO (AUDIO IN) L/R: Voltage 450 mV, impedance 47 kilohms

MIC:

Sensitivity 1 mV, impedance

10kilohms

(USB) port: Type A

Outputs

PHONES:

accepts headphones of 8 ohms or more

Disc player section

System

Compact disc and digital audio system

Laser

Semiconductor laser

(λ = 770 – 810 nm)

Emission duration: continuous

Laser Output

Max. 44.6 ∝W*

*This output is the value measured at a distance of 7 7/8 in (200 mm) from the objective lens surface on the Optical Pick-up Block with 9/32 in

(7 mm) aperture.

Frequency response 2 Hz – 20 kHz

Wave length

770 – 810 nm Signal-to-noise ratio

More than 90 dB Dynamic range

More than 88 dB

Tape deck section

Recording system

4-track 2-channel stereo Frequency response

50 – 13,000 Hz (±3 dB), using Sony TYPE I tape

Wow and flutter

±0.35% W.Peak (IEC)

0.3% W.RMS (NAB)

±0.4% W.Peak (DIN)

Continued l

Information Additional

59US