REC1 Recording

Recording Folder name Track name source

MP3 disc

Same as the

 

REC15)

recording

 

2)

 

 

source

AUDIO CD

TRACKXXX4)

1)In Program Play mode, the folder name is “FLDRxxx”, and the track name depends on the recording source (AUDIO CD or MP3 disc).

2)Up to 32 characters of the name are assigned.

3)XXX is the folder number from 001 to 997.

4)XXX is the track number from 001 to 999.

5)A new track is recorded in the “REC1” folder each time REC1 recording is performed.

Notes

•Do not connect the system and the USB device through a USB hub.

•You cannot eject the disc during CD-USB Synchro Recording or REC1 Recording.

•When recording from an AUDIO CD, the tracks are recorded as 128 kbps MP3 audio tracks.

When recording from an MP3 disc, MP3 audio tracks are recorded with the same bit rate as the original MP3 audio tracks.

•While recording from an MP3 disc, no sound is output and “High Speed Recording” appears in the display.

•If you cancel the recording halfway, an MP3 audio track is created up to the point when the recording was stopped.

•Recording stops automatically if:

–the USB device runs out of space during recording.

–the number of MP3 audio tracks on the USB device reaches the limit for the number that the system can recognize.

•The maximum number of MP3 audio track folders that can be recorded on a single USB device by this system is 997.

The maximum number of MP3 audio tracks that can be recorded on a single USB device by this system is 999.

The maximum number of MP3 audio tracks and folders may vary depending on the MP3 audio track and folder structure.

•For MP3 disc, if a folder or track that you are trying to record already exists on the USB device with the same name, a sequential number is added after the name without overwriting the original folder or track.

•If you perform recording after the erase operation, the new recorded tracks or folders may have the name that same as the erased tracks or folders. Therefore, the playback sequence may different from the recording sequence.

•When you perform CD-USB Synchro Recording or REC1 Recording, the following would not be recorded:

–sound from microphone.

–beat sound from drum pads or beat pattern.

–effector mode sound.

26US