External sync input (LMD-1420/2020)

When the EXT SYNC button is in the on position, the unit can be operated on the sync signal supplied from an external sync generator.

Automatic termination (connector with mark only)

The input connector is terminated internally at 75 ohms when nothing has been connected to the output connector. If a cable is connected to the output connector, the internal terminal is automatically released and the signals input to the input connector are output to the output connector (loop-through).

Select color temperature and gamma mode You can select the color temperature from among two (high and low) settings and gamma mode from among five settings. You can also adjust the color temperature to the appropriate setting.

Aspect setting

You can set the monitor to 4:3 or 16:9 display mode according to the input video signal.

Various markers (LMD-1420/2020)

Displays frame boundaries such as the center marker, safe area marker, etc. and supports the various film aspect ratios.

Scan setting

You can set the display size to -3% under scan or 5% over scan mode.

On-screen menus

You can set the appropriate settings according to the connected system by using the on-screen menus.

Key inhibit function

You can inhibit a key, function to prevent misoperation.

Select language display

You can select from seven display languages English, French, German, Spanish, Italian, Japanese and Chinese.

External remote control function

You can directly select the input signal, aspect, etc., by operating the equipment connected to the PARALLEL REMOTE terminal.

Features 11