Sony LMD-1410/1420, LMD-2010/2020 USER CONFIG menu

Submenu	Setting
CONTROL	You can adjust the picture.
	• CONTRAST: Adjusts the picture
	contrast.
	• BRIGHT: Adjusts the picture
	brightness.
	• CHROMA: Adjusts color intensity.
	The higher the setting, the greater
	the intensity. The lower the setting,
	the lower the intensity.
	• PHASE: Adjusts color tones. The
	higher the setting, the more
	greenish the picture. The lower the
	setting, the more purplish the
	picture.
	• APERTURE: Adjusts the picture
	sharpness. The higher the setting,
	the sharper the picture.
	For details of input signals and adjustable/
	setting items, see page 14.
ASPECT (LMD-	Sets the aspect ratio of the picture to 4:3 or
1410/2010 only)	16:9.

USER CONFIG menu

You can select a language, etc.

Items that cannot be adjusted depending on the input signal are displayed in blue.

LMD-1410/2010

.

U S E R C O N F I G

xR G B / C O M P S E L		xxxx
· C O M P	L E V E L	xxxxx
· N T S C S E T U P		x
· G A M M A		x
· F O R M AT	D I S P	xxx
· L A N G UAG E		xxx
· P I C D E L AY M I N		xxx

LMD-1420/2020

U S E R C O N F I G ( 1 / 2 ) R r

xR G B / C O M P S E L		xxxx
· C O M P	L E V E L	xxxxx
· N T S C S E T U P		x
· G A M M A		x
· F O R M AT	D I S P	xxx
· L A N G UAG E		xxx

U S E R C O N F I G ( 2 / 2 ) R r

xM A R K E R		xxx
· C E N T E R	M A R K E R	xxx
· S A F E T Y	A R E A	xxx
· M A R K E R	L E V E L	x
· M A R K E R	M AT	xxx
· S C A N		xxxx
· P I C D E L AY M I N		xxx

Submenu	Setting
RGB/COMP SEL	When a signal input via the RGB/
	COMPONENT connector is being
	monitored, based on the signal being
	input, select RGB or COMP.
COMP LEVEL	Select the component level from among
	three modes.
	• SMPTE		for 100/0/100/0 signal
	• BETA 0		for 100/0/75/0 signal
	• BETA 7.5 for 100/7.5/75/7.5 signal
NTSC SETUP	Select the NTSC setup level from two
	modes.
	The 7.5 setup level is used mainly in
	North America. The 0 setup level is used
	mainly in Japan.
GAMMA	Selects the appropriate gamma mode.
	You can select from among 5 settings.
	When “3” is selected, the setting is
	roughly same as the gamma mode of the
	CRT (2.2).
FORMAT DISP	Select the display mode of the signal
	format.
	• ON: The format is always displayed.
	• OFF: The display is hidden.
	• AUTO: The format is displayed for
		about 10 seconds when the input
		of the signal begins.
LANGUAGE	You can select the menu or message
	language from among seven languages.
	•	ENGLISH: English
	•	DEUTSCH: German
	•	FRANÇAIS: French
	•	ITALIANO: Italian
	•	ESPAÑOL: Spanish
	•	: Japanese
	•	: Chinese
MARKER	When the frame of the film is displayed
	on the screen, select the aspect ratio
	according to the film.
	• When 16:9 aspect ratio is selected
		with the ASPECT button
		You can select from among 4:3,
		15:9, 14:9, 13:9 and OFF.
	• When 4:3 aspect ratio is selected
		with the ASPECT button
		You can select from among 16:9
		and OFF.
CENTER MARKER	Select ON to display the center mark of
	the picture and OFF not to display.
SAFETY AREA	Select the safe area size for the aspect
	ratio determined by the ASPECT button.
	You can select from among OFF, 80%,
	85%, 88%, 90% and 93%.
MARKER LEVEL	Sets the luminance to display the
	MARKER and SAFETY AREA.
	When the setting is low, the marker is
	displayed dark.
MARKER MAT	Selects whether you put mat on the
	outside of the marker display.

• OFF: No mat is put.

• HALF: Gray mat is put.

• BLACK: Black mat is put.

24 Adjustment Using the Menus