aTally lamp (LMD-1420/2020)

You can check the status of the monitor by the color of the tally lamp.

The tally lamp lights in red, green or amber according to the input signals.

bPOWER switch and indicator

Press to turn on the power. The indicator turns on. Press again to turn off the power.

cKEY INHIBIT indicator

When the key inhibit function works, the indicator lights.

For the key inhibit function, refer to “KEY INHIBIT menu” on page 25.

dVOLUME buttons

Press the + button to increase the volume or the – button to decrease it.

eMenu operation buttons Displays or sets the on-screen menu.

M/m/</, (arrow) buttons

Select the menu or make various adjustments.

MENU button

Press to display the on-screen menu.

Press again to clear the menu.

RESET button

Resets the value of an item back to the previous value. This button functions when the menu item is adjusted (displayed) on the screen.

ENTER button

Press to confirm a selected item on the menu.

fASPECT select button

Sets the aspect ratio of the picture, 4:3 or 16:9.

gSCAN select button

You can change the scan size of the picture. When you press the button, the scan size is changed to normal (5% over scan), under (-3% under scan) or ZOOM (LMD- 1420/2020 only) set on the menu (see page 25).

hBLUE ONLY button

Press this button to eliminate the red and green signals. Only blue signal is displayed as an apparent monochrome picture on the screen. This facilitates “chroma” and “phase” adjustments and observation of VCR noise.

iEXT SYNC (external sync) button

Press to operate the unit on an external sync signal through the EXT SYNC IN connector.

The EXT SYNC button works when the component/ RGB signals are input.

jSDI button

Press to monitor the signal from the OPTION IN connector.

kRGB/COMPONENT button

Press to monitor the signal through the RGB/ COMPONENT input connectors.

lLINE B button

Press to monitor the signal through the LINE B input connectors.

mLINE A button

Press to monitor the signal through the LINE A input connectors.

nSpeakers

The audio signal which is selected by the input select button on the front panel is output.

Location and Function of Parts and Controls

13