dRGB/COMPONENT connectors

Analog RGB signal or component (Y, PB, PR) signal input connectors and their loop-through output connectors.

Press the RGB/COMPONENT button on the front panel to monitor the signal input through these connectors.

G/Y, B/PB, R/PR IN/OUT (BNC)

These are the input/output connectors for an analog RGB and a component (Y, PB, PR) signal. Unless an external sync signal is input, the monitor is synchronized with the sync signal contained in the G/Y signal.

AUDIO IN/OUT (RCA pin)

When using an analog RGB or a component signal as a video signal, use these jacks for the input/ output of an audio signal. Connect them to the audio input/output jacks on equipment such as a VCR.

ePARALLEL REMOTE terminal (modular connector)

Forms a parallel switch and controls the monitor externally.

For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to this modular connector.

For details on the pin assignment and factory setting function assigned to each pin, see page 28.

fLINE B connectors

Line input connectors for composite video and audio signals and their loop-through output connectors. Press the LINE B button on the front panel to monitor the signal input through these connectors.

VIDEO IN/OUT (BNC)

These are the input/output connectors for a composite video signal. Connect them to the composite video input/output connectors on equipment such as a VCR, video camera, or another monitor.

AUDIO IN/OUT (RCA pin)

These are the input/output jacks for an audio signal. Connect them to the audio input/output jacks on equipment such as a VCR.

gLINE A connectors

Line input connectors for Y/C separate, composite video and audio signals and their loop-through output connectors.

Press the LINE A button on the front panel to monitor the input signal through these connectors.

If you input signals to both Y/C IN and VIDEO IN, the signal input to the Y/C IN is selected.

Y/C IN/OUT (4-pin mini-DIN)

These are the input/output connectors for a Y/C separate signal. Connect them to the Y/C separate input/output connectors on equipment such as a VCR, video camera, or another monitor.

VIDEO IN/OUT (BNC)

These are the input/output connectors for a composite video signal. Connect them to the composite video input/output connectors on equipment such as a VCR, video camera, or another monitor.

AUDIO IN/OUT (RCA pin)

These are the input/output jacks for an audio signal. Connect them to the audio input/output jacks on equipment such as a VCR.

hAC IN socket

Connect the supplied AC power cord.

16 Location and Function of Parts and Controls