+
–
+
–
+
–
+ 
1
–
+
–
++
L A T I N A M E R I C A
P A L & P A L - N _ A R E A A R G E N T I N A
P A R A G U A Y
U R U G U A Y
N T S C & P A L - M A R E A O T H E R A R E A
Argentina
Paraguay
Uruguay
Other area
2~31Turn on the unit with the a/? (power) switch on the rear panel.
The SELECT SETTING screen appears.
Customers who will use this unit in the shaded areas shown in the map below should select NTSC AREA.
Other customers should select PAL AREA.
S E L E C T S E T T I N G
N O R T H _ A M E R I C A
L A T I N A M E R I C A
A F R I C A A U S T R A L A S I A E U R O P E M I D D L E - E A S T A S I A E X C E P T J A P A N J A P A N
1North America
2Latin America
3Africa Australia/New
Zealand, Europe,
Middle East, Russia
4Asia Except Japan
5Japan
2 Press the + or – button to select the area where you intend to use the unit and press the ENTER button.
If you select either 1, 3 or 5The confirmation screen is displayed. Confirm the selected area. When the setting is wrong, press the RETURN button to return to the previous screen.
S E L E C T T H I S A R E A ?
N O R T H A M E R I C A
[ E N T E R ] Y E S [ R E T U R N ] NO
If you select either 2 or 4One of the following screens appears. Press the + or – button to narrow the area further and then press the ENTER button.
The confirmation screen is displayed. Confirm the selected area. When the setting is wrong, press the RETURN button to return to the previous screen.
A S I A E X C E P T J A P A N | NTSC area |
N T S C _ A R E A | |
P A L A R E A | PAL area |
|
|
3 Press the ENTER button.
The SELECT SETTING screen disappears and the menu item settings suitable for the selected area are applied.
Note
When you have selected the wrong area, set the following items using the menu. See “The default setting values for each area” (page 16) on the setting value.
•COLOR TEMP (on page 22)
•COMPONENT LEVEL (on page 25)
•NTSC SETUP (on page 25)
•COLOR SPACE (on page 22)
Selecting the Default Settings | 17 |
|
|