Rear/Bottom Panel

1 2 3

4 5 6 7 8 9 0

–

qa qs

qd

qf qg qh

qj

qk

aa/? (power) switch

The power is turned on or off.

The monitor is turned on by pressing side ?.

bAC IN socket

Connect the supplied AC power cord.

cDC 24V IN connector

Plug the DC 24V power supply to this connector to provide power to the monitor.

dAUDIO L/R IN connectors (phono jack) Connect to the audio outputs of a VCR or to an audio mixer.

eCOMPOSITE IN connector (BNC) Input connector for composite signals.

fY/C IN connector (4-pinmini-DIN)Input connector for Y/C signals.

gG/Y IN connector (BNC)

Input connector for G of RGB signals and component Y (luminance) signals.

hB/PB IN connector (BNC)

Input connector for B of RGB signals and PB (blue color difference) of component signals.

iR/PR IN connector (BNC)

Input connector for R of RGB signals and PR (red color difference) of component signals.

jEXT SYNC IN/OUT (external sync) connectors (BNC)

To use the external sync signal, press the function button that EXT SYNC is assigned (F1 button at the factory setting).

IN connector

When this unit operates on an external sync signal, connect the reference signal from a sync generator to this connector.

Note

When inputting a video signal with the jitters, etc. the picture may be disturbed. We recommend using the TBC (time base corrector).

OUT connector

Loop-through output of the IN connector. Connect to the external sync input of video equipment to be synchronized with this unit.

When the cable is connected to this connector, the 75-ohm termination of the input is automatically released, and the signal input to the IN connector is output from this connector.

Location and Function of Parts and Controls

11