FRAME | Sets the position of the main display | ||||||||
| when MULTI DISPLAY is set to POP | ||||||||
| and the sub display is put on the 4:3 |
| |||||||
| display. |
| |||||||
| • RIGHT: The main display is put by | ||||||||
|
| the right side of the sub display. |
| ||||||
| • LEFT: The main display is put by the | ||||||||
|
| left side of the sub display. |
| ||||||
|
|
|
|
|
|
|
|
| |
SUB PICTURE | Sets the size of the sub picture. You can | ||||||||
SIZE | select from among 1 to 3. When the | ||||||||
| setting is high, the size becomes large. | ||||||||
|
|
|
|
|
|
|
|
| |
WAVE FORM | Sets the signal to display the waveform. | ||||||||
| You can select from among Y, R, G and | ||||||||
| B signals. |
| |||||||
| You can select the sync timing signal for | ||||||||
| Y, R, G or B signal from H PERIOD or | ||||||||
| V PERIOD. |
| |||||||
| The indications of the waveform signify | ||||||||
| as illustrated below, although the |
| |||||||
| percentages and characters do not appear | ||||||||
| on the display. |
| |||||||
|
|
|
|
|
|
|
|
| 75% |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| 50% | |
| 100% |
|
|
|
| ||||
|
|
|
|
|
| ||||
25%
1 field
Field guideline
FUNCTION BUTTON SETTING
USER CONFIGtFUNCTION BUTTON SETTING
|
|
|
|
|
| F 1 | B U T TO N : | xxxx |
|
| F 2 | B U T TO N : | xxxx |
|
| F 3 | B U T TO N : | xxxx |
|
| F 4 | B U T TO N : | xxxx |
|
|
|
|
|
|
|
|
|
|
|
Submenu Setting
F1 BUTTON to F4 Assigns the function to the function
BUTTON buttons of the front panel and turns the function on or off.
You can assign the function from among
SCAN, ASPECT, EXT SYNC, BLUE ONLY, MONO, MARKER, H/V
DELAY, MULTI DISPLAY, CLOSED CAPTION and APA.
Factory setting
•F1 button: EXT SYNC
•F2 button: SCAN
•F3 button: ASPECT
•F4 button: H/V DELAY
About the function assigned to the function button
SCAN
Press to change the scan size of the picture according to the setting of “STANDARD” or “FULL+NATIVE” selected in SCAN (page 25).
ASPECT
Press to set the aspect ratio of the picture, 4:3 or 16:9.
Note
The panel of the monitor is 16:10.
When the 16:9 signal is displayed, black bars appear in the upper and lower positions of the display. This is not a malfunction. (See “Scan mode image” on page 26.)
EXT SYNC (external sync)
Press to operate the unit on an external sync signal through the EXT SYNC IN connector.
EXT SYNC works when the component/RGB signals are input.
BLUE ONLY
Press the assigned button to eliminate the red and green signals. Only blue signal is displayed as an apparent monochrome picture on the screen. This facilitates “chroma” and “phase” adjustments and observation of VCR noise.
MONO
Press the assigned button to display a monochrome picture. When the buttons is pressed again, the monitor switches automatically to color mode.
MARKER
Press to display the marker. Set the aspect marker and safety area size in the MARKER SETTING menu (see page 26).
H/V DELAY
Press to observe the horizontal and vertical sync signals at the same time.
MULTI DISPLAY
Press the assigned button to display the multi display. Set the multi display setting in the MULTI DISPLAY SETTING menu (see page 27).
CLOSED CAPTION
Press the assigned button to display the closed caption. Set the closed caption setting in the CLOSED CAPTION SETTING menu (see page 29).
APA (Auto Pixel Alignment)
Press to adjust the picture automatically to maximum clarity for the signal input to the HD15 input connector.
28 Adjustment Using the Menus