Press to select the items and setting values.
ENTER buttonPress to confirm a selected item on the menu. When the menu is not displayed and the button is pressed, the distinguished signal format is displayed.
RETURN buttonWhen the menu is displayed and the button is pressed, the value of an item is reset to the previous value. When the menu is not displayed and the button is pressed, the function selected in FUNCTION BUTTON SETTING of the USER CONFIG menu is displayed on the side of the F1 to F4 button. Also, when the fan stops, this button blinks.
kInput select buttonsPress the button to monitor the signal input to each connector.
COMPOSITE button: to monitor the signal through the COMPOSITE IN connector
Y/C button: to monitor the signal through the Y/C IN connector
RGB button: to monitor the RGB signal through the connectors for the R/G/B signal input COMPONENT button: to monitor the component signal through the connectors for Y/PB/PR signal input
A
A
B
B
HD15 button: to monitor the signal through the HD15 input connector
DVI button: to monitor the signal through the
You can turn the assigned function on or off. The factory setting is as follows;
F1 button: EXT SYNCF2 button: SCANF3 button: ASPECTF4 button: H/V DELAYYou can assign the function from among SCAN,
ASPECT, EXT SYNC, BLUE ONLY, MONO, MARKER, H/V DELAY, MULTI DISPLAY, CLOSED CAPTION and APA in FUNCTION BUTTON SETTING of the USER CONFIG menu (see page 28).
For details of the function assigned to the function button, see page 28.
mSpeakersThe audio signal which is selected by the input select button is output.
When
When
The audio signals from the speakers are output from the AUDIO L/R OUT connector on the rear (see page 12).
nStandYou can adjust the height of the monitor (see page 14).
Location and Function of Parts and Controls | 9 |
|
|