USER CONFIG menu
The USER CONFIG menu is used for setting the system, marker, multi display, function button, closed caption and audio.
USER CONFIG
S Y S T E M S E T T I N G :
M A R K E R S E T T I N G :
M U LT I D I S P L AY S E T T I N G :
F U N C T I O N B U T TO N S E T T I N G :
C L O S E D C A P T I O N S E T T I N G :
AU D I O S E T T I N G :
SYSTEM SETTING
USER CONFIGtSYSTEM SETTING | ||
|
|
|
| M AT R I X : | xxx |
| C O M P O N E N T L E V E L : | xxxxx |
| N T S C S E T U P : | x |
| S C A N : | xxxxxx |
| F O R M AT D I S P L AY: | xx |
| L A N G UAG E : | E N G L I S H |
| P OW E R S AV I N G : | xx |
| P I C T U R E D E L AY M I N : | x |
|
|
|
|
|
|
Submenu | Setting |
MATRIX | Applied to 480/60I or 480/60P |
| signal. Select 601 or 709. |
|
|
COMPONENT LEVEL | Selects the component level from |
| among three modes. |
| • SMPTE: for 100/0/100/0 signal |
| • BETA 0: for 100/0/75/0 signal |
| • BETA 7.5: for 100/7.5/75/7.5 |
| signal |
|
|
NTSC SETUP | Selects the NTSC setup level from |
| two modes. |
| The 7.5 setup level is used mainly |
| in North America. The 0 setup level |
| is used mainly in Japan. |
|
|
SCAN | Enables setting of the scan mode by |
| the button which the scan function |
| is assigned. Select from among |
| “STANDARD” and |
| “FULL+NATIVE”. The displayed |
| picture differs according to the |
| selected mode (see “Scan mode |
| |
| When STANDARD is selected |
| NORMAL scan (0 % scan) and |
| OVER scan (5 % over scan) |
| When FULL+NATIVE is selected |
| NORMAL scan, OVER scan, |
| FULL screen and NATIVE (1080i |
| and 720P only) |
|
|
Submenu | Setting | |
FORMAT DISPLAY | Selects the display mode of the | |
| signal format and scan mode. | |
| • ON: The format and scan mode | |
|
| are always displayed. |
| • OFF: The display is hidden. | |
| • AUTO: The format and scan | |
|
| mode are displayed for |
|
| about 10 seconds when the |
|
| input of the signal starts. |
|
| |
LANGUAGE | Selects the menu or message | |
| language from among seven | |
| languages. | |
| • | ENGLISH: English |
| • | FRANÇAIS: French |
| • | DEUTSCH: German |
| • | ESPAÑOL: Spanish |
| • | ITALIANO: Italian |
| • | : Japanese |
| • | : Chinese |
|
| |
POWER SAVING | Sets the power saving mode on or | |
| off. When you set to ON, the | |
| monitor goes into power saving | |
| mode if no signal is input for about | |
| one minute. | |
|
| |
PICTURE DELAY MIN | Selects to set the delay by the | |
| picture processing to the minimum | |
| level when the interlace signal is | |
input.
• 0: Mode for giving precedence to the picture quality. It takes longer than “1” or “2” for processing the picture. “0” is the factory setting.
• 1: The processing time is short and this is a mode suitable for an animation. Even when the picture is constructed by one field such as the proxy picture of XDCAM, a smooth picture is displayed.
• 2: The processing time is shorter. As the line flicker is displayed in this mode, it is available for checking the line flicker of the telop work and so on.
Adjustment Using the Menus | 25 |
|
|