Location and Function of Parts and Controls

Front Panel

1

 

COMPOSITE

+

 

 

 

Y/C

–

 

RGB

+

 

COMPONENT

 

 

 

–

qa

A-2

+

–

 

A-1

 

 

B-1

+

 

B-2

–

 

HD15

+

 

DVI

–

 

F1

 

qs

F2

+

F3

–

 

F4

 

2

3

4

5

6

7

8

9

0

qd

qf

aTally lamp

You can check the status of the monitor by the color of the tally lamp.

The tally lamp lights in red, green or amber according to the setting of PARALLEL REMOTE in the REMOTE menu.

b1 (standby) switch and indicator

When you press the switch to turn on the power in standby mode (the a/? switch on the rear panel is turned on), the indicator lights in green.

When you press this switch again, the monitor is set in standby mode and the indicator lights in red.

c-(key inhibit) indicator

Lights in red when the key inhibit is set to ON.

dCONTROL button

Press to display the buttons on the front panel. Press again to clear the display.

eVOLUME buttons

Press the + button to increase the volume or the – button to decrease it.

fCONTRAST buttons Adjusts the picture contrast.

Press the + button to make the contrast higher or the – button to make it lower.

gPHASE buttons Adjusts color tones.

Press the + button to make the skin tones greenish or the

– button to make them purplish.

hCHROMA buttons Adjusts the color intensity.

Press the + button to increase the color intensity or the – button to decrease it.

iBRIGHT (brightness) buttons Adjusts the picture brightness.

Press the + button to increase the brightness or the – button to decrease it.

jMenu operation buttons Displays or sets the on-screen menu.

MENU button

Press to display the on-screen menu. Press again to clear the menu.

8 Location and Function of Parts and Controls