Adjusting the Height of the Stand
You can adjust the height of the monitor in four levels for the
A and B in the following list indicate the screw holes shown in the illustrations in steps 2 and 4.
Height of the monitorUnit: mm (inches)
Position of the stand | A | A | B | B |
attachment bracket |
|
|
|
|
|
|
|
|
|
Arm attachment | B | A | B | A |
position |
|
|
|
|
|
|
|
|
|
376.7 | 403.0 | 444.1 1), 2) | 470.4 1) | |
| (14 7/8) | (15 7/8) | (17 1/2) | (18 5/8) |
– 3) | 430.5 | 471.6 1) | 497.9 1), 2) | |
|
| (17) | (18 5/8) | (19 5/8) |
1)You can install the input adaptor with the stand attached to the monitor.
2)Default setting
3)You cannot attach the stand in combinations of these positions.
1 Remove the stand attachment bracket following steps 1 to 5 of “Installing to the Rack” (on page 13).
2 Attach the stand attachment bracket to the A or B screw holes.
The bracket is attached to the B holes at the factory.
A
A
B B
A
A
+
B
B
A:Screw holes for low position
B:Screw holes for high position
A
A
B B
A
A
+
B
B
A:Screw holes for low position
B:Screw holes for high position
3 Attach the stand attachment bracket with four screws.
Use the screws removed in step 5 of “Installing to the Rack”.
4 Attach the arm.
Hang the hook of the bracket for using the A screw holes.
A 
A
B 
B
A A
+
B B
Hang the hook of the bracket for using the B screw holes.
5 Secure the arm with four screws.
Use the screws removed in step 3 of “Installing to the Rack”.
6 Attach the arm cover.
To align the lower part of theUse the A screw holes for the
14 Adjusting the Height of the Stand