1Operation

Listening to the Sound of a Connected Component

Before starting operation, be sure to read “Connecting the Headphone System” (pages 13 to 15) and make the proper connections.

1 Turn on the component connected to the processor.

DVD player or other audio

POWER

or video component

2 Remove the headphones from the processor.

The processor turns on automatically and, after about 3 seconds, the infrared emitters grow. Then the DECODE MODE indicator lights up, depends on the audio signal inputted from the connected audio or video component and the setting of the EFFECT switch.

3 Put on the headphones.

The POWER indicator lights red, and the headphones automatically turn on. Be sure to match the right and left side of the headphones with your ears and wear the headphones at the correct angle so that the Auto Power On/Off function works correctly.

POWER indicator

16GB Operation