To recharge the headphone battery after use
Place the headphones on the processor after use. The CHG indicator lights up, and the RF indicator goes off, and then charging starts.
Since the
Notes
•The processor automatically turns off while charging the battery.
•This system is designed to charge only the supplied rechargeable battery, type
•If dry batteries are installed, they cannot be charged.
•Do not attempt to use the supplied
•Charge in an environmental temperature of between 0˚C and 40˚C (between 32˚F and 104˚F). Otherwise, the battery may not be fully charged.
•Do not touch the contact pin of the processor. If a contact pin becomes dirty, charging may not be possible.
•Charging may not be completed if the processor’s contact pin and headphones’ contact point are dusty. Wipe them with a cotton bud, etc.
Charging and usage time
Approx. charging time | Approx. usage time*1 |
3 hours*2 | 7 hours*3 |
*1 at 1 kHz, 1 mW + 1 mW output
*2 hours required to fully charge an empty battery
*3 Time may vary, depending on the temperature or conditions of use.
Checking the battery power
Pull up the
Charge the rechargeable battery or install new alkaline batteries if the POWER indicator does not light up.
POWER indicator
Note
The rechargeable
Preparation 13US