Connecting cables (sold separately)

Use the optical digital connecting cable POC-15AB (mini-plug y rectangular plug) when connecting the optical digital output mini-jack on portable DVD players, portable CD players, or other digital components to the DIGITAL IN jack.

Notes on optical digital connecting cable

Do not drop objects on the optical digital connecting cable or expose the cable to shock.

Grasp the plug to connect or disconnect the cable.

Be sure that the ends of the optical digital connecting cable are kept clean. Dust at the ends of the cable can degrade performance.

When storing the system, attach the cap to the end of the plug and be careful not to fold or bend the optical digital connecting cable with a bend radius less than 25 mm (1 inch).

The bend radius of the optical digital connecting cable should be no less than 25 mm (1 inch).

25 mm (1 inch)

Connecting the processor to analog components

Use an audio cord (sold separately) to connect the audio output jacks on a VCR, TV, or other component to the LINE IN (L/R) jacks on the processor.

Processor

VCR, TV, or other component

 

To audio output jacks

To LINE IN jacks

Audio left

Audio left

(white)

 

(L, white)

 

Audio right (R, red)

 

Audio right (red)

Audio cord (sold separately)

Connecting cables (sold separately)

Use the connecting cable (stereo mini-plug y pin plug ⋅ 2) when connecting a stereo mini-jack (line out jack or headphone jack) to the LINE IN jacks.

In this case, set the volume on the player at a medium level. Noise can occur if the volume on the player is set too low.

16US Connection