Rear Panel of the Processor

R LINE IN L

TUNE/ID SET

DC IN 9V

 

ATT

0dB

-8dB

 

DIGITAL IN DIGITAL OUT

 

(THROUGH)

1 2 3 4 5 6

1TUNE/ID SET button

(See pages 21 and 23 for details.) Use this button when reception deteriorates, or when using additional headphones.

4DIGITAL IN jack

(See page 15 for details.)

Connect a DVD device, digital satellite/ TV receiver, or other digital component (sold separately) to this jack.

2ATT (attenuator) switch

Set this switch to “0 dB” if the volume is too low for analog input. Normally, this switch should be set to “–8 dB.”

3LINE IN jacks

(See page 16 for details.)

Connect the audio output jacks on an audio or video component (sold separately), such as a video cassette player or TV, to these jacks.

5DIGITAL OUT jack

(See page 15 for details.)

Connected components' digital signal integrity retained when installed.

6DC IN 9V jack

Connect the supplied AC power adaptor to this jack. (Be sure to use the supplied AC power adaptor. Using products with a different plug polarity or other characteristics can cause a malfunction.)

8US Preparation