Using Additional Headphones

In this system, by using additional MDR-RF6000 wireless headphones (sold separately), more than one person can enjoy the surround sound experience wirelessly at the same time.

Charge additional headphones with the processor of this system.

*There is no limit to the number of headphones that can be used within the RF signal transmission area.

MDR-RF6000

(sold separately)

Processor

Notes

The processor turns off automatically while charging. Remove these headphones from the processor when using other headphones.

This unit is not compatible with headphones other than MDR-RF6000, since this unit employs a proprietary 2.4 GHz wireless digital transmission system.

When using additional headphones

Each processor has its own ID number. When using additional MDR-RF6000 wireless headphones (sold separately), be sure to set the processor’s ID to that of the headphones, otherwise the headphones will not work.

1

2

3

Remove the headphones from the processor.

The processor turns on automatically.

Put on the headphones.

The headphones automatically turn on.

Note

Charge the battery of additional headphones before setting their IDs, or use commercially available (size AA) alkaline batteries.

Press and hold TUNE/ID SET on the processor and that on the headphones at the same time for more than 3 seconds.

A repeated beep sound is heard from the headphones and ID setting starts. When the sound changes to a continuous beep sound, the ID number is set for the headphones.

Operation 23US