|
|
|
| TIME | EDIT/NO AMS ± |
|
|
| ||||||||
|
|
|
|
| EDIT/ | AMS ± | DIGITAL | REC LEVEL |
|
| ANALOG |
|
| |||
POWER |
|
|
|
| NO YES |
| 0 | • |
|
|
| 4 | • 5 | • | 6 |
|
|
|
|
|
|
|
|
|
|
|
|
| • | ||||
|
|
|
|
|
|
|
|
| • | 3 |
|
|
|
|
| 7 |
|
|
|
|
|
|
|
|
|
| • |
|
|
|
|
| • |
g |
|
|
|
| 0 ) | • |
|
| • | 2• |
|
|
|
|
| •8 |
|
|
|
|
|
| • |
|
| 1 |
|
|
|
|
| 9 | |
|
|
|
|
|
|
| – + |
| • | 0 |
| 10 | ||||
TIMER |
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
| PUSH ENTER |
|
|
|
|
|
| L | R |
|
|
REC OFF PLAY |
|
|
| SCROLL/ DISPLAY/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| INPUTFILTER CLOCK SET CHAR |
|
|
|
|
|
|
|
|
|
|
|
| |
PHONES PHONE LEVEL | OPT2 | OPT1 | • COAX |
|
|
|
|
|
|
|
|
|
|
|
| |
|
| • |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| •ANALOG | § | ( | P |
| p |
|
|
| r |
|
|
|
|
|
|
| PLAY MODE REPEAT TIME |
|
|
|
|
|
|
| |||||
|
|
|
|
| OPEN/CLOSE |
|
|
|
|
|
|
| REC |
|
|
|
0 | 10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| INPUT | § OPEN/CLOSE | ( p rREC | |||||||||||||
Checking the remaining recordable time on the MD
Press TIME.
•When you press the TIME button repeatedly while recording, the display alternates between the recording time of the current track and the remaining recordable time on the MD.
•When you press the TIME button repeatedly while the deck is stopped, the display alternates between total disc playing time and remaining recordable time on the MD (see page 20).
Monitoring the input signal (Input Monitor)
Before starting recording, you can monitor the selected input signal through the deck’s output connectors.
1Press §OPEN/CLOSE to remove the MD.
2Set INPUT according to the input signal you want to monitor.
When the INPUT switch is set at ANALOG
The analog signal input through the LINE(ANALOG) IN connectors is output to the DIGITAL OUT OPTICAL connector after A/D conversion, and then to the LINE(ANALOG) OUT connectors and the PHONES jack after D/A conversion.
When the INPUT switch is set to a digital source
After passing through the sampling rate converter, the digital signal input through the respective DIGITAL IN connector is output to the DIGITAL OUT OPTICAL connector, and after D/A conversion to the LINE(ANALOG) OUT connectors and PHONES jack. Either “32kHz”, “44.1kHz”, or “48kHz” appears in the display depending on the sampling rate of the digital signal.
3Press rREC.
If the INPUT switch is set at ANALOG,
If the INPUT switch is set at a digital position,
Recording on MDs
If “Auto Cut” appears in the display (Auto Cut)
There has been no sound input for 30 seconds during recording. The 30 seconds of silence are replaced by a blank of about 3 seconds and the deck changes to recording pause.
zYou can turn off the Auto Cut Function
For details, see “To turn off the Smart Space Function and Auto Cut Function” below. Note that when you turn off the Auto Cut Function, the Smart Space Function is turned off automatically.
If “Smart Space” appears in the display (Smart Space)
There has been an extended silence of 4 to 30 seconds in length during recording. The silence is replaced with a blank of about 3 seconds and the deck continues recording. Note that new track numbers may not be marked for portions recorded while this function is activated.
To turn off the Smart Space Function and Auto Cut Function
1While the deck is stopped, press EDIT/NO twice.
2Turn AMS to display the S08 menu, then press AMS.
3Turn AMS to select “S.Space Off”, then press AMS.
4Press EDIT/NO.
To turn on the Smart Space Function and Auto Cut Function again
1 Do Steps 1 and 2 in “To turn off the Smart Space Function and Auto Cut Function” above.
2 Turn AMS to select “S.Space On”, then press AMS.
3Press EDIT/NO.
Notes
•When you turn off the Smart Space Function, the Auto Cut Function is also turned off automatically.
•The Smart Space Function and Auto Cut Function are factory set to on.
•The Smart Space Function does not affect the order of the track numbers being recorded, even if the blank space occurs in the middle of a track.
•If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting (On or Off) of the Smart Space and Auto Cut Functions the next time you turn on the deck.