Editing Recorded MDs
3Turn AMS until “Nm In ?” appears in the display, then press AMS.
4Turn AMS to select “Disc” to label an MD, or to specify the track to label, and press AMS.
A flashing cursor appears in the display.
5Press DISPLAY/CHAR to select the character type as follows:
To select | Press DISPLAY/CHAR repeatedly | |||
|
| until | ||
|
|
|
|
|
Uppercase letters | “A” appears in the display | |||
|
|
|
|
|
Lowercase letters | “a” appears in the display | |||
|
|
|
|
|
Numbers | “0” appears in the display | |||
|
|
|
|
|
|
|
|
| |
|
|
| A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6Turn AMS to select the character. The selected character flashes.
Letters, numbers, and symbols appear in sequential order as you turn AMS.
You can use the following symbols in titles:
!” # $ % & ’ ( ) * + ,
D 
You can press DISPLAY/CHAR to change the character type at any time during Step 6 (see Step 5).
7Press AMS to enter the selected character.
The cursor shifts rightward and waits for the input of the next character.
D 
8Repeat Steps 6 and 7 until you have entered the entire title.
If you entered the wrong character
Press 0or )until the character to be corrected starts flashing, and repeat Steps 6 and 7 to enter the correct character.
To erase a character
Press 0or )until the character to be erased starts flashing, then press EDIT/NO.
To enter a space
Press AMS or )while the cursor is flashing.
9Press YES.
This completes the labeling procedure and the title appears in the display.
To cancel labeling
Press p.
Note
You cannot label a track or an MD while you are recording over an existing track.
Copying a track or disc title
You can copy a track or disc title to use it as a title of another track or the disc title within a disc. Note that you can do this operation by using the controls on the deck only.
1Press EDIT/NO.
2Turn AMS until “Name ?” appears in the display and press AMS.
3Turn AMS until “Nm Copy ?” appears in the display.
4Press AMS.
5Turn AMS to select “Disc” to copy the disc title, or the track whose title you want to copy and press AMS.
If “No Name” appears in the display
The disc or the track has no name.
6Turn AMS to select “Disc” for disc title or to specify the track number to copy a title, and press AMS.
“Complete!!” appears for a few seconds to indicate that the copying operation is completed.
To cancel title copying
Press EDIT/NO or p.