Recording on MDs

Synchro-Recording With a Sony CD Player Z

By connecting your deck to a Sony CD player or Hi-Fi Component System, you can easily dub CDs onto MDs using the CD synchro buttons on the remote. If your deck is connected to a Sony CD player by a digital input cable, track numbers are automatically marked as appear on the original even when “T.Mark Off” is selected in the S02 menu. If your deck is connected to a Sony CD player by audio connecting cords through the LINE(ANALOG) IN connectors, track numbers are automatically marked when you set the S02 menu to “T.Mark LSyn” (see page 14).

As the same remote controls both the CD player and the deck, you may have trouble operating both units if they are far from each other. If you do, place the CD player close to this deck.

OPEN/CLOSE

 

 

POWER

6

 

EDIT/NO

YES

 

DISPLAY

SCROLL

TIME

D.O BIT

FILTER

 

PLAY MODE

DATE

CONTINUE

SHUFFLE

PROGRAM

RECORDED

PRESENT

A

B

C

D

E

F 1

G 2

H 3

I 4

J 5

K 6 L 7 M 8 N 9 O 10

P 11 Q 12 R 13 S 14 T 15

U 16 V 17 W 18 X 19 Y 20

Z21 – 22 23 . 24 , 25

REPEAT A˜B A.SPACE M.SCAN

/>25 ? ! ( )

 

WRITE

CLEAR P. HOLD

NAME

CHAR

NUM

·P p

=+ r

START

0

)

T.REC MUSIC SYNC

STANDBY

STOP

 

CD-SYNC

 

 

STOP

START STANDBY NO CLIP

 

 

 

CD PLAYER

FADE

 

CD PLAYER P

P

= +

 

 

 

 

DIGITAL REC LEVEL

 

1Set the source selector on the amplifier to CD.

2Do Steps 2 to 4 in “Recording on an MD” on page 8 to prepare the deck for recording.

3Insert a CD into the CD player.

4Select the playback mode (Shuffle Play, Program Play, etc.) on the CD player.

5Press STANDBY.

The CD player pauses for playing and the deck pauses for recording.

6Press START.

The deck starts recording and the CD player starts playback.

The track number and elapsed recording time of the track appear in the display.

If the CD player does not start playing

Some CD player models may not respond when

you press START on the remote of the deck. Press Pon the remote of the CD player instead.

7Press STOP to stop synchro-recording.

To pause recording

Press STANDBY or CD PLAYER P.

To restart recording, press START or CD PLAYER P. A new track number is marked each time you pause recording.

zYou can use the remote of the CD player during synchro-recording

When you press p, the CD player stops and the deck pauses for recording.

When you press P, the CD player pauses and the deck pauses for recording.

To restart synchro-recording, press ·.

zYou can change CDs during synchro-recording

Do the following steps instead of Step 7 above.

1Press pon the remote of the CD player. The deck pauses for recording.

2Change the CD.

3Press · on the remote of the CD player. Synchro-recording restarts.

zYou can also do synchro-recording with a Sony video CD player

Using the procedure for synchro-recording with a Sony CD player, you can do synchro-recording with a Sony video CD player also.

To select the video CD player, press button number 2 while pressing down the POWER button on the remote before starting the procedure.

To select the CD player again, press button number 1 while pressing down the POWER button.

The deck is factory set to a CD player for synchro- recording.

zYou can check the remaining recordable time on the

MD

Press TIME (see page 20).

17EN