Manuals / Brands / Home Audio / Stereo System / Sony / Home Audio / Stereo System

Sony MHC-DP1000D, MHC-DP900D, MHC-DP900D Inserting two size AA (R6), Hooking up the system (continued), batteries into the remote, ?/1, Operating a Sony TV, To attach the speaker pads

1 68

Download 68 pages, 610.38 Kb

Hooking up the system (continued)

8(Except for Pan American and European models)

Set the color system according to your TV.

The color system is factory set to NTSC for region code 3 models, and PAL for other region code models. Each time you perform the procedure below, the color system changes as follows:

NTSC yPAL

Use the buttons on the unit.

1 Press ?/1 to turn on the system.

2 Press DVD.

3 Press x.

4 Press ?/1 while holding down X. The system turns off.

5 Press ?/1 to turn on the system.

The system turns on and the color system is changed.

To attach the speaker pads

Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.

Notes

•Keep the speaker cords away from the antennas to prevent noise.

•The type of speakers supplied vary according to the model you purchased (see “Specifications” on page 59).

•Do not place the rear speakers on top of a TV. This may cause color distortion in the TV screen.

•For MHC-DP1000D, be sure to connect both left and right rear speakers. Otherwise, the sound will not be heard.

•When you play a VIDEO CD recorded in the different color system from the one you set to the system, the picture image may be distorted.

Inserting two size AA (R6)

batteries into the remote

]

} }

]

Operating a Sony TV

You can use the following buttons on the remote to operate a Sony TV.

To	Press
Turn the TV on or off	TV ?/1.

Switch the TV’s video input	TV/VIDEO.

Change the TV channels	TV CH +/–.

Adjusts the volume of the TV	TV VOL +/–.
speaker(s)

Tip

When the remote no longer operates the system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.

Notice for carrying this system

Do the following to protect the DVD mechanism.

1Turn on the system, then press DVD. Make sure that all discs are removed from the unit.

2Hold down DVD, then press ?/1 until “LOCK” appears.

3Release ?/1 first, then release DVD.

4Unplug the AC power cord.

12

Contents

Page WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture IMPORTANT NOTICE Table of Contents Parts Identification Getting Started Setting Up for DVD/VIDEO CD DVD/VIDEO CD/CD Tuner Sound Adjustment Other Features Hooking Up the Optional Components This system can play the following discs Discs that this system cannot play Region code of DVDs you can play on this system Note on playback operations of DVDs and VIDEO CDs Main unit wj wk eaesedefegehej wg wh qsqa Remote control t;ta rl rkrhrj rg qa qdqs Ora t/Tqk digipad operations DVD (When OSD does not appear in the screen), TUNER, TAPE A/B functions Identification Parts DVD function (When OSD appears in the screen) v/V/b/B Hooking up the system 1Connect the front speakers 2Connect the rear speakers. (MHC-DP1000Donly) 3Connect the center speaker. (MHC-DP1000Donly) 4Connect the FM/AM antennas 7Connect the power cord to a wall outlet Hooking up the system (continued) Inserting two size AA (R6) Setting up your speakers for Dolby Pro Logic (MHC-DP1000Donly) Positioning the speakers Setting the center speaker Setting up your speakers for Dolby Pro Logic (continued) xLFE xD.COMP xT.TONE (MHC-DP1000Donly) Setting the time 1 Turn on the system 2 Press CLOCK/TIMER SET 3 Press . or > repeatedly to select “CLOCK SET” 4 Press ENTER Saving the power in standby mode Press DISPLAY repeatedly when the power is off To cancel the Power Saving mode Setting Up for DVD/VIDEO CD/CD Using the Setup Display Using the Setup Display (continued) — LANGUAGE SETUP — SCREEN SETUP — CUSTOM SETUP — SPEAKER SETUP Speaker settings (continued) —Normal Play/Shuffle Play/ Slow-motionPlay/Freeze Frame Playing a disc (continued) — PBC Play Playing VIDEO CDs with PBC functions (Ver. 2.0) (continued) — Program Play 5 Select the title, chapter, or track you want to program xWhen programming a DVD xWhen programming a VIDEO CD or 6 To program other discs, titles, chapters, or tracks, repeat steps 3 to 7 Press nN to start Program Play — Resume Play — Repeat Play Viewing information about the disc Checking the playing time and remaining time Using the front panel display Press DISPLAY During normal playback Checking the playing time and remaining time (continued) Checking the playback information — ADVANCED Press DVD DISPLAY during playback Press Changing the sound xWhen playing a VIDEO CD or CD Displaying the audio information of the disc The display examples are as follows: chapter/track/index/scene Select the angle you want using the numeric buttons or , then press repeatedly to select Press DVD DISPLAY during playback Changing the angles Displaying the subtitles 2 Press v or V repeatedly to select “SUBTITLE”, then press ENTER 3 Press v or V repeatedly to select the language you want, then press ENTER To cancel the SUBTITLE setting —CUSTOM PARENTAL CONTROL/ PARENTAL CONTROL To turn off the Custom Parental Control function To change the password Playing the disc for which Custom Parental Control is set 1 Insert the disc for which Custom Parental Control is set 2 Enter your 4-digitpassword using the numeric buttons, then press ENTER Locking discs (continued) Playing the disc for which Parental Control is set 1 Insert the disc and press nN Area code — Preset Tuning Using the Radio Data System (RDS) (European model only) What is the Radio Data System Receiving RDS broadcasts Loading a tape 1 Press TAPE A/B repeatedly to select deck A or B 2 Press DECK A Z or DECK B Z. 3 Insert a tape in deck A or B Playing a tape to play one side —CD Synchro Recording/High-SpeedDubbing/Recording Manually/Program Edit Recording to a tape (continued) — Program Edit Timer-recordingradio programs 1 Tune in the preset radio station (see “Listening to the radio” on page 40) 3 Press . or > repeatedly to select “REC SET”, then press ENTER 4 Set the time to start recording To listen to multi channel sound Press 2CH/MULTI 2CH: MULTI*: Selecting the preset effect file To cancel Sound effect options effects Creating a personal audio — Personal file Press AMP MENU Changing the spectrum analyzer display Press SPECTRUM on the remote To adjust the brightness of the display Singing along: Karaoke (continued) — Sleep Timer — Daily Timer 2 Adjust the volume 3 Press CLOCK/TIMER SET 5 Set the time to start playback 6 Set the time to stop playback following step 7 Press . or > repeatedly until the music source you want appears Connecting audio components Precautions On operating voltage On safety On placement On heat buildup Precautions (continued) Information Additional Troubleshooting (continued) Picture (When letters/numbers appear in the display) Specifications AUDIO POWER SPECIFICATIONS: (MHC-DP1000DUSA model only) Amplifier section Canadian model: European model: Specifications (continued) General Glossary Bit Rate Chapter Dolby Digital Dolby Pro Logic Surround Multi-anglefunction Multilingual function Parental Control Playback Control (PBC) Region Code Language code list Control Menu Item List TITLE SCENE TRACK CHAPTER Setup Display Item List LANGUAGE SCREEN CUSTOM SPEAKER