Speaker settings (continued)

xLEVEL (MHC-DP1000D only)

You can vary the level of each speakers as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default settings are in parentheses.

•CENTER (0 dB): Adjust the level of the center speaker (–6 dB to +6 dB, 1 dB steps).

•REAR (0 dB): Adjust the level of the rear speakers (–6 dB to +6 dB, 1 dB steps).

•SUBWOOFER (10 dB): Adjust the level of the subwoofer (–10 dB to +10 dB, 1 dB steps).

xTEST TONE (MHC-DP1000D only)

The speakers will emit a test tone to adjust “BALANCE” and “LEVEL”.

•OFF: The test tone is not emitted from the speakers.

•ON: The test tone is emitted from each speaker in sequence while adjusting balance or level. When you select one of the “SPEAKER SETUP” items, the test tone is emitted from both left and right speakers simultaneously.

Note

When you adjust the level of the subwoofer, set T.TONE to “OFF”.

To adjust the volume of all the speakers at once

Turn VOLUME (or press VOL +/– on the remote).

Adjusting the speaker volume and level

1 When the playback is stopped, press DVD SET UP, then select “SPEAKER SETUP”.

2 Select “TEST TONE” and set “TEST TONE” to “ON”.

You will hear the test tone from each speaker in sequence.

3 From your listening position, select “BALANCE” or “LEVEL”, then press b or B repeatedly to adjust the value of “BALANCE”, or press v or V repeatedly to adjust the value of “LEVEL”.

The test tone is emitted from both left and right speakers simultaneously.

4 Select “TEST TONE” and set “TEST TONE” to “OFF” to turn off the test tone.

Notes

•When you adjust the speaker settings, the sound cuts off for a moment.

•If you adjust these parameters using OSD while adjusting the speaker parameters using AMP MENU or SPEAKER LEVEL (pages 14–15), the display on the unit turns off.

22