Manuals / Brands / Home Audio / Stereo System / Sony / Home Audio / Stereo System

Sony MHC-DP1000D, MHC-DP900D, MHC-DP900D Troubleshooting (continued), Speakers, DVD/VIDEO CD/CD Player

1 68

Download 68 pages, 610.38 Kb

Troubleshooting (continued)

Speakers

Sound comes from only one channel or unbalanced left and right volume.

•Check the speaker connection and speaker placement.

•The source being played back is monaural.

•Adjust the balance parameters (pages 14, 21).

The sound comes from the center speaker only. (MHC-DP1000D only)

•Depending on the disc, the sound may come from the center speaker only.

There is no sound from the center speaker. (MHC-DP1000D only)

•Set the center speaker level to the appropriate level.

•2CH/MULTI is set to “2CH”.

•Make sure the DSP effect is on (page 47).

There is no sound from the rear speakers. (MHC-DP1000D only)

•Set the rear speakers level to the appropriate level.

•2CH/MULTI is set to “2CH”.

•The software being played back has limited sound effects. Check the volume with the test tone.

No sound or only a very low-level sound is heard from the rear speakers.

• Make sure the DSP effect is on (page 47).

Sound lacks bass.

•Check that the speaker’s + and – terminals are connected correctly.

DVD/VIDEO CD/CD Player

The disc tray does not close.

• The disc is not placed properly.

The disc does not play.

•The disc is not lying flat in the disc tray.

•The disc is dirty (see page 53).

•The disc is inserted label side down.

•Moisture condensation has built up.

•The system cannot play CD-ROMs, etc. (page 6).

•The region code on the DVD does not match the system.

The disc does not start playback from the beginning.

•Program Play, Shuffle Play, or Repeat Play has been selected (pages 23, 24, 26, 28). Press CLEAR to cancel these functions before playing a disc.

•Resume Play has been selected. When the playback is stopped, press x, then start DVD playback (page 28).

•The title, DVD or PBC menu automatically appears on the screen.

Playback starts automatically.

• The DVD features an auto playback function.

Playback stops automatically.

•Some discs may contain an auto pause signal. While playing such a disc, the playback stops at the auto pause signal.

You cannot perform some functions such as Stop, Search, Slow-motion Play, Repeat Play, Shuffle Play, or Program Play.

•Depending on the disc, you may not be able to do some of the operations above. Refer to the operating instructions supplied with the disc.

56

Contents

Page WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture IMPORTANT NOTICE Table of Contents Parts Identification Getting Started Setting Up for DVD/VIDEO CD DVD/VIDEO CD/CD Tuner Sound Adjustment Other Features Hooking Up the Optional Components This system can play the following discs Discs that this system cannot play Region code of DVDs you can play on this system Note on playback operations of DVDs and VIDEO CDs Main unit wj wk eaesedefegehej wg wh qsqa Remote control t;ta rl rkrhrj rg qa qdqs Ora t/Tqk digipad operations DVD (When OSD does not appear in the screen), TUNER, TAPE A/B functions Identification Parts DVD function (When OSD appears in the screen) v/V/b/B Hooking up the system 1Connect the front speakers 2Connect the rear speakers. (MHC-DP1000Donly) 3Connect the center speaker. (MHC-DP1000Donly) 4Connect the FM/AM antennas 7Connect the power cord to a wall outlet Hooking up the system (continued) Inserting two size AA (R6) Setting up your speakers for Dolby Pro Logic (MHC-DP1000Donly) Positioning the speakers Setting the center speaker Setting up your speakers for Dolby Pro Logic (continued) xLFE xD.COMP xT.TONE (MHC-DP1000Donly) Setting the time 1 Turn on the system 2 Press CLOCK/TIMER SET 3 Press . or > repeatedly to select “CLOCK SET” 4 Press ENTER Saving the power in standby mode Press DISPLAY repeatedly when the power is off To cancel the Power Saving mode Setting Up for DVD/VIDEO CD/CD Using the Setup Display Using the Setup Display (continued) — LANGUAGE SETUP — SCREEN SETUP — CUSTOM SETUP — SPEAKER SETUP Speaker settings (continued) —Normal Play/Shuffle Play/ Slow-motionPlay/Freeze Frame Playing a disc (continued) — PBC Play Playing VIDEO CDs with PBC functions (Ver. 2.0) (continued) — Program Play 5 Select the title, chapter, or track you want to program xWhen programming a DVD xWhen programming a VIDEO CD or 6 To program other discs, titles, chapters, or tracks, repeat steps 3 to 7 Press nN to start Program Play — Resume Play — Repeat Play Viewing information about the disc Checking the playing time and remaining time Using the front panel display Press DISPLAY During normal playback Checking the playing time and remaining time (continued) Checking the playback information — ADVANCED Press DVD DISPLAY during playback Press Changing the sound xWhen playing a VIDEO CD or CD Displaying the audio information of the disc The display examples are as follows: chapter/track/index/scene Select the angle you want using the numeric buttons or , then press repeatedly to select Press DVD DISPLAY during playback Changing the angles Displaying the subtitles 2 Press v or V repeatedly to select “SUBTITLE”, then press ENTER 3 Press v or V repeatedly to select the language you want, then press ENTER To cancel the SUBTITLE setting —CUSTOM PARENTAL CONTROL/ PARENTAL CONTROL To turn off the Custom Parental Control function To change the password Playing the disc for which Custom Parental Control is set 1 Insert the disc for which Custom Parental Control is set 2 Enter your 4-digitpassword using the numeric buttons, then press ENTER Locking discs (continued) Playing the disc for which Parental Control is set 1 Insert the disc and press nN Area code — Preset Tuning Using the Radio Data System (RDS) (European model only) What is the Radio Data System Receiving RDS broadcasts Loading a tape 1 Press TAPE A/B repeatedly to select deck A or B 2 Press DECK A Z or DECK B Z. 3 Insert a tape in deck A or B Playing a tape to play one side —CD Synchro Recording/High-SpeedDubbing/Recording Manually/Program Edit Recording to a tape (continued) — Program Edit Timer-recordingradio programs 1 Tune in the preset radio station (see “Listening to the radio” on page 40) 3 Press . or > repeatedly to select “REC SET”, then press ENTER 4 Set the time to start recording To listen to multi channel sound Press 2CH/MULTI 2CH: MULTI*: Selecting the preset effect file To cancel Sound effect options effects Creating a personal audio — Personal file Press AMP MENU Changing the spectrum analyzer display Press SPECTRUM on the remote To adjust the brightness of the display Singing along: Karaoke (continued) — Sleep Timer — Daily Timer 2 Adjust the volume 3 Press CLOCK/TIMER SET 5 Set the time to start playback 6 Set the time to stop playback following step 7 Press . or > repeatedly until the music source you want appears Connecting audio components Precautions On operating voltage On safety On placement On heat buildup Precautions (continued) Information Additional Troubleshooting (continued) Picture (When letters/numbers appear in the display) Specifications AUDIO POWER SPECIFICATIONS: (MHC-DP1000DUSA model only) Amplifier section Canadian model: European model: Specifications (continued) General Glossary Bit Rate Chapter Dolby Digital Dolby Pro Logic Surround Multi-anglefunction Multilingual function Parental Control Playback Control (PBC) Region Code Language code list Control Menu Item List TITLE SCENE TRACK CHAPTER Setup Display Item List LANGUAGE SCREEN CUSTOM SPEAKER