Press ENTER.

Setting up your speakers for Dolby Pro Logic (continued)

Specifying the distance of the speakers

Use the remote for the operation.

1 Press AMP MENU.

2 From your listening position, press v or V repeatedly to select the parameter.

Adjustable parameters are described below.

3 Press b or B repeatedly to select the setting you want.

4 Repeat steps 2 to 3 to set other parameters.

5 Press ENTER.

Tips

•You can use the digipad instead of the cursor buttons (v/V/b/B).

•You can use “SPEAKER SETUP” in the Setup Display to specify the distance of the speakers (page 21).

Note

If each of the front or rear speakers is not placed at an equal distance from your listening position, set the distance of the closest speaker.

Adjustable parameters

The default settings are in the parentheses.

• FRONT: 1.0 meter to 12.0 meters (2.4 meters)

(3 feet to 40 feet (8 feet))* Front speakers distance.

• CENTER: FRONT to 1.5 meters (2.4 meters) (FRONT to 5 feet (8 feet))*

Center speaker distance.

•REAR: FRONT to 4.5 meters (1.5 meters) (FRONT to 15 feet (5 feet))*

Rear speakers distance.

* North American model only.

Notes

•To enjoy Dolby Pro Logic surround with 2 channel PCM or analog input sources, select “NORMAL SURR” from the sound effect options (see page 47).

•If you press AMP MENU while adjusting parameters using OSD, the OSD turns off.

Specifying the speakerparameters

Use the remote for the operation.

1 From your listening position, press

SPEAKER LEVEL.

Adjustable menus and parameters are described below.

2 Press v or V repeatedly to select the parameter.

3 Press b or B repeatedly to select the setting you want.

4 Repeat steps 2 to 3 to set other parameters.

5

Tips

•You can use the digipad instead of the cursor buttons (v/V/b/B).

•You can use “SPEAKER SETUP” in the Setup Display to specify the balance, level, and test tone parameters (page 21).

Adjustable parameters

The default settings are in the parentheses.

xBALANCE

•FRNT L___R: (center)

Balance between the front left and right speakers.

•(MHC-DP1000D only) REAR L___R: (center)

Balance between the rear left and right speakers.

Range: 6 dB (L) to 6 dB (R), 1 dB steps

xLEVEL (MHC-DP1000D only)

•REAR ** dB: (0 dB) Level of the rear speakers.

Range: –6 dB to 6 dB, 1 dB steps

•CTR ** dB: (0 dB)

Level of the center speaker. Range: –6 dB to 6 dB, 1 dB steps

•SW ** dB: (10 dB) Level of the sub woofer.

Range: –10 dB to 10 dB, 1 dB steps

14