Timer-recording radioprograms

To timer-record, you must set the clock (see “Setting the time” on page 15) and preset the radio stations (see “Presetting radio stations” on page 40) beforehand.

1 Tune in the preset radio station (see “Listening to the radio” on page 40).

2 Press CLOCK/TIMER SET.

“DAILY1 SET” appears.

3 Press . or > repeatedly to select “REC SET”, then press ENTER.

“ON” appears and the hour indication flashes.

4 Set the time to start recording.

Press . or > repeatedly to set the hour, then press ENTER.

The minute indication flashes.

Press . or > repeatedly to set the minutes, then press ENTER.

The hour indication flashes again.

5 Set the time to stop recording following step 4.

The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., “TUNER FM 5”), then the original display appears.

6 Insert a recordable tape into deck B.7 Turn off the power.

When the recording starts, the volume level is set to the minimum.

To

Do this

Check the setting

Press TIMER SELECT (or

 

CLOCK/TIMER SELECT on

 

the remote) and press . or

 

> repeatedly to select

 

“REC SELECT”, then press

 

ENTER.

 

 

Change the setting

Start over from step 1.

 

 

Cancel the

Press TIMER SELECT (or

Timer-recording

CLOCK/TIMER SELECT on

 

the remote) and press . or

 

> repeatedly to select

 

“TIMER OFF”, then press

 

ENTER.

 

 

Notes

If the power is on at the preset time, the Timer- recording does not work.

When you use the Sleep Timer, the Timer-recording will not turn on the system until the Sleep Timer turns it off.

The power turns on 15 seconds before the preset time.

Tape

45