WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

This appliance is classified as a CLASS 1 LASER product. This label is located on the rear exterior.

Don’t throw away the battery with general house waste, dispose of it correctly as chemical waste.

The following caution label is located inside the apparatus.

Note on power cord plug shapes (Saudi Arabian model only)

For AC 220 V wall sockets

1Make the appropriate voltage setting on the system (only for models with a voltage selector).

2Make sure that the 13 A 3-pin plug (Type BF) is securely attached to the power cord. (The 13 A 3-pin plug is attached when shipped from the factory.)

For AC 127 V wall sockets

1Make the appropriate voltage setting on the system (only for models with a voltage selector).

2Remove the 13 A 3-pin plug using a screwdriver.

3Attach the supplied parallel blade plug (Type A).

2GB