Sony MHC-GN1000D 48GB, xSIZE, xDISTANCE, To return to the default setting when changing a setting

To return to the default setting when changing a setting

Press CLEAR before you press ENTER. However, note that you cannot return the setting of “SIZE” to default setting.

Note

You cannot perform SPEAKER SETUP when you connect headphones or microphones to the unit.

xSIZE

When you connect or disconnect the center speaker, surround speakers or subwoofer or when you move the surround speakers, change the setting for CENTER, SURROUND and SUBWOOFER. Since the front speaker setting is fixed, you cannot change them.

Position diagram

	90
A	45 A
B	B
	20

FRONT YES

CENTER YES: Normally select this. NONE: Select this if the center speaker is not connected.

SURROUND BEHIND: Select this if the surround speakers are located in section B. SIDE: Select this if the surround speakers are located in section A. NONE: Select this if the surround speakers are not connected.

SUBWOOFER YES: Normally, select this (FST-ZX100D/LBT-ZX100D/ MHC-GN1000D only).

Select this if you have connected an optional sub woofer (FST-ZX80D/ LBT-ZX80D only).

NONE: Select this if the subwoofer is not connected (FST-ZX100D/ LBT-ZX100D/MHC-GN1000D only).

Select this if an optional sub woofer is not connected (FST-ZX80D/ LBT-ZX80D only).

Notes

•When you change the setting, the sound cuts off for a moment.

•Depending on the settings of other speakers, the subwoofer may output excessive sound.

•When you play back a DVD VIDEO that does not have subwoofer output recorded, no sound is output from the subwoofer, even if “SUBWOOFER” is set to “YES”.

xDISTANCE

The default distance setting for the speakers in relation to the listening position is shown below. When you set the distance using QUICK SETUP (page 14), the settings are automatically displayed. The items that are set to “NONE” in “SIZE” cannot be selected.

3.0 m 3.0 m

48GB